Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 49

RAL–Remote Access Level
Sets the default remote serial protocol access level for any of the serial ports.
Commands
Command Description
RAL <value> Sets the access level on all Ethernet port.
(Saved value)
RAL+PRTA <value> Sets the access level for the RS232 port.
(Saved value)
Examples
Set port to Login Required:
(RAL+PRTA 1)
SDI–SDI Payload Overrride
Overrides the SMPTE 352M payload for HBMIC-SDI inputs.
This setting applies to all HBMIC-SDI inputs in the system (such as, not per input).
Commands
Command Description
SDI <value> Changes the HBMIC-SDI payload override
setting. This command is only available if
the video electronics are on. (Saved value)
SDI+PAYL "<custom Defines the customized SMPTE 352M
string>" payload as a 4-byte hex string when the
SDI command is set to custom. For more
details, contact Christie Technical Support.
This command is only available if the video
electronics are on. (Saved value)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = No Access—Disables the port
1 = Login Required—Sets read-only access
until a separate login is performed
2 = Free Access—Executes commands at
the operator level unless a separate login is
performed (Default)
Values
0 = Auto Detect (Default)
1 = Custom
2 = 3G-A 1080p60
3 = 3G-A 1080p59.94
4 = 3G-A 1080p50
5 = 3G-A 2K60
6 = 3G-A 2K59.94
7 = 3G-A 2K50
custom string = 4-byte hex string in big-
endian order:
"<b0><b1><b2><b3>"
49