Christie TruLife+ Griffyn 4K32-RGB Technical Reference page 61

Examples
Display the current logged in user and their access level:
(UID?)
Log out the current user:
(UID)
Log in as service using the default password:
(UID "user" "user")
WRP–Warp Selection
Selects the warp map to use on the projector.
Commands
Command Description
WRP+KGAN? Returns if gain compensation is enabled or
disabled when 2D keystone is applied.
(Read-only)
WRP+KGAN <value> Enables or disables gain compensation when
2D keystone is applied.
WRP+SLCT?L Retrieves a list of available warp maps.
(Read-only)
WRP+SLCT <value> Changes the warp map to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Examples
Disable warping:
(WRP+SLCT 0)
Select the third warp map:
(WRP+SLCT 3)
Retrieve a list of available warp maps:
(WRP+SLCT?L)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-01 Rev. 1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
0 = Disables gain compensation (Default)
1 = Enables gain compensation
—
0 = Turns off warping
1 to 4 = Selects one of four warp maps, if
available
11 = 2D keystone
61