Mounting Tools To The Vacuum Module - ABB IRB 14050 Product Specification

2 Grippers

2.3.5 Mounting tools to the vacuum module

2.3.5 Mounting tools to the vacuum module
General
The vacuum module is delivered with a first set of suction cups and filters for demo
and test purposes. Application-specific suction tools should be designed and
chosen by the system integrator. Air filters are required in the suction tools to
ensure the long-term performance of the vacuum module. If the vacuum function
is not required, passive assembly tools, such as press tools, can also be mounted
to the suction tool interface. Any tools mounted to the gripper must be included in
the final risk assessment by the system integrator.
Continues on next page
74
© Copyright 20192020 ABB. All rights reserved.
Product specification - IRB 14050
3HAC064627-001 Revision: G