Operating Requirements - ABB IRB 14050 Product Specification

1 Description

1.3.1 Operating requirements

1.3.1 Operating requirements
Protection standard
Robot variant
Manipulator + controller
Explosive environments
The robot must not be located or operated in an explosive environment.
Working range limitations
EPS will not be selectable and no mechanical limitations available.
Ambient temperature
Description
Manipulator + controller
during operation
Complete robot during
transportation and storage
i
Relative humidity
Description
Complete robot during operation, transportation and
storage
24
Standard/Option
Standard
Standard
At low environmental temperature < 10ºC is, as with any other machine, a warm-up phase
recommended to be run with the robot. Otherwise there is a risk that the robot stops or run with
lower performance due to temperature dependent oil and grease viscosity.
© Copyright 20192020 ABB. All rights reserved.
Protection standard IEC529
IP30
Temperature
i
+ 5°C (41°F) to + 40°C (104°F)
- 10°C (14°F) to + 55°C (131°F)
Relative humidity
Max. 85% at constant temperature
Product specification - IRB 14050
3HAC064627-001 Revision: G