NETGEAR WAX204 User Manual page 74

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
The Add WPS Client page displays and shows a description of the WPS method.
5. Click the Next button.
The Add WPS Client page adjusts.
The Push Button (recommended) radio button is selected by default.
6. Select the PIN Number radio button.
7. In the Enter Clients' PIN field, enter the PIN number of the WiFi device.
8. Click the Next button.
For four minutes, the access point attempts to find the WiFi device (that is, the client)
that you want to join the access point's main WiFi network.
During this time, the WPS LED on the top panel of the access point blinks.
9. Within four minutes, go to the WiFi device and use its WPS software to join the
network without entering a password.
After the access point establishes a WPS connection, the WiFi LED lights and the
Add WPS Client page displays a confirmation message.
10. To verify that the WiFi device is connected to the access point's WiFi network, select
BASIC > Attached Devices.
The WiFi device displays on the page.
Basic WiFi and Radio Features 74 User Manual