NETGEAR WAX204 User Manual page 98

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
You might be able to find this information in the configuration window of your email
program. If you leave this field blank, log and alert messages are not sent.
8. In the Outgoing Mail Server Port Number field, enter the port number that the
mail server uses.
If you do not know the port number, leave the default port number, which is 25.
9. To send email alerts over a secure connection, select the Secure connection (use
SSL) check box.
10. If your outgoing email server requires authentication, select the My Mail Server
requires authentication check box, and do the following:
a. In the User Name field, type the user name for the outgoing email server.
b. In the Password field, type the password for the outgoing email server.
11. To send alerts when someone attempts to visit a blocked site, select the Send Alerts
Immediately check box.
Email alerts are sent immediately when someone attempts to visit a blocked site.
12. To send logs based on a schedule, from the Send logs according to this schedule
menu, select the schedule type and specify the associated settings if applicable:
• When log is full. The access point sends log messages when the log is full.
• Hourly. The access point sends log messages hourly.
• Daily. The access point sends log messages daily at the time that you specify.
From the Time menu, select the time, and select the AM or PM radio button.
• Weekly. The access point sends log messages weekly at the day and time that
you specify. From the Day menu, select the day of the week. From the Time
menu, select the time, and select the AM or PM radio button.
The default selection from the menu is None.
13. Click the Apply button.
Your settings are saved.
Logs are sent automatically according to the schedule that you set. If the log fills
before the specified time, it is sent. After the log is sent, it is cleared from the access
point memory. If the access point cannot email the log and the log buffer fills, the
access point overwrites the log.
Security, Firewall, and Access
Rules
98 User Manual