Chapter 10 Vpn Client [Router Mode] - NETGEAR WAX204 User Manual

10
VPN Client [Router Mode]
If the access point is in router mode, you can use it as a VPN client (as opposed to a VPN
server) to let devices on the access point's network securely access an external network
using virtual private networking (VPN). This chapter describes how to set up the access
point as a VPN client and use VPN access.
Note: For you to be able to use the access point as a VPN client, you must obtain a
third-party license for VPN server access. The local browser UI includes a link to a
third-party VPN service (PureVPN) so that you can obtain a license.
For information about using the router as a VPN server, see VPN Server and Service
with OpenVPN [Router Mode] on page 177.
This chapter includes the following sections:
• About setting up the access point as a VPN client [router mode]
• Enable the VPN client in the access point and connect to a VPN server [router mode]
• Disconnect the access point from the VPN server [router mode]
172