Block Specific Internet Sites [Router Mode]; Set Up Keyword And Domain Blocking [Router Mode] - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
8. To change the MAC address or device for a device on the blocked list, do the
following:
a. Select the check box for the device.
b. Click the Edit button.
The Edited Blocked Device page displays.
c. Change the MAC address, device name, or both.
d. Click the Apply button.
The Access Control page displays again.
9. Click the Apply button.
Your settings are saved.

Block specific Internet sites [router mode]

If the access point is in router mode, you can block keywords and domains (websites)
to prevent certain types of HTTP traffic from accessing your network. Keyword and
domain blocking does not work for HTTPS traffic.
By default, keyword blocking is disabled and no domains are blocked.
Note: The information in this section and subsections does not apply if the access point
is in access point mode.

Set up keyword and domain blocking [router mode]

You can set up blocking of specific keywords and domains to occur continuously or
according to a schedule.
To set up keyword and domain blocking:
1. Launch a web browser from a computer or mobile device that is connected to the
access point network.
2. Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
Security, Firewall, and Access
Rules
86 User Manual