Use An Existing Dynamic Dns Account [Router Mode] - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Dynamic DNS.
The Dynamic DNS page displays.
5. Select the Use a Dynamic DNS Service check box.
6. From the Service Provider menu, select NETGEAR.
7. Select the No radio button.
8. In the Host Name field, enter the name that you want to use for your URL.
The host name is also called the domain name. Your free URL includes the host name
that you specify and ends with mynetgear.com. For example, enter
MyName.mynetgear.com.
9. In the Email field, enter the email address that you want to use for your account.
10. In the Password field, enter the password that you want to use for your account.
The password must contain between 6 and 32 characters.
11. Click the Register button.
12. Follow the onscreen instructions to register for your NETGEAR Dynamic DNS service.
Use an existing Dynamic DNS account
[router mode]
If you already created a Dynamic DNS (DDNS) account with NETGEAR, No-IP, or Dyn,
you can set up the access point to use your account.
To set up DDNS if you already created an account:
1. Launch a web browser from a computer or mobile device that is connected to the
access point network.
2. Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
Dynamic DNS [Router Mode] 169 User Manual