NETGEAR WAX204 User Manual page 150

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
4. Select ADVANCED.
The ADVANCED Home page displays.
The color in the heading of each of the panes uses the following coding:
• Green circle. The settings are fine and no problems exist. For a WiFi network, a
green circle displays if the network is enabled and secured.
• Red circle. Settings are disabled, a problem exists, or the connection is down.
For a WiFi network, a red circle displays if the network is disabled.
The following tables describe the fields in the panes on the Advanced Home page.
Field
Router Information
Hardware Version
Firmware Version
GUI Language Version
Operation Mode
Field
LAN Port
To change these settings, see Use the Setup Wizard on page 36.
MAC Address
DHCP
IP Address
IP Subnet Mask
Maintain and Monitor
Description
The access point hardware version, which is the model number WAX204.
The access point firmware version. If you update the firmware, the version changes
(see Update the firmware on page 129).
The access point language version for the local browser UI.
The operation mode is AP. For more information about the changing the operation
mode, see Change the system mode to access point mode or to router mode on
page 164.
Description
The MAC address that applies to the access point WAN (Internet) port.
Displays if the DHCP client of the access point is enabled.
The LAN IP address that the access point receives from an existing router in your
network or the static (fixed) IP address that you manually configured.
The IP subnet mask that the access point uses.
150 User Manual