NETGEAR WAX204 User Manual page 156

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
(Continued)
Field
Connection Type
Device Name,
including device
model and device type
icon
IP Address
Internet Download
Speed by Device
Internet Upload Speed
by Device
The following information displays only if the access point is in router mode and
supports VPN clients devices.
Field
VPN Client Devices
Device Name
Remote IP Address
Maintain and Monitor
Description
For WiFi devices, the connection type information shows the radio and WiFi network
(Wireless 1, Wireless 2, or Wireless 3) to which the device is connected.
For LAN devices, the connection type is always Wired.
The device name, if detected. This field also displays the device model, if detected,
and device type icon. This information is for display only.
You can change the information that displays (see Step 5).
The IP address that is assigned to the device when it joined the access point network.
This address can change when a device is disconnected and rejoins the network.
Note: If you enable access control or QoS, the IP address is displayed in the Device
Name field.
If QoS is enabled (see Enable QoS and automatically set the Internet bandwidth on
page 100 or Enable QoS and manually set the Internet bandwidth on page 101), the
download speed in Mbps that the device uses.
If QoS is enabled (see Enable QoS and automatically set the Internet bandwidth on
page 100 or Enable QoS and manually set the Internet bandwidth on page 101), the
unload speed in Mbps that the device uses.
Description
The device name, if detected.
The IP address of the device at the other side of the VPN tunnel.
156 User Manual