Reboot The Access Point From The Local Browser Ui - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
Reboot the access point from the local
browser UI
You or NETGEAR technical support can reboot the access point from its local browser
UI, either locally or remotely, for example, if the access point seems to be unstable or
is not operating normally.
To reboot the access point from the local browser UI:
1. Launch a web browser from a computer or mobile device that is connected to the
access point network.
2. Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Router Information pane, click the REBOOT button.
A pop-up warning window displays.
6. Click the Yes button.
The access point restarts.
Diagnostics and
Troubleshooting
222 User Manual