Factory Default Settings - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

Factory default settings

You can reset the access point to the factory default settings, which are shown in the
following table.
For more information about resetting the access point to its factory settings, see Factory
default settings on page 138.
Table 4. WAX204 access point factory default settings
Feature
Login to the local browser UI
Login URL
Local login user name
Local device password
System modes
Router mode
Access point mode
DHCP settings
DHCP client
DHCP server
WiFi network
WiFi communication
SSID names
Security for the default
Wireless 1 network
Security for the optional
Wireless 2 and Wireless 3
networks
Factory Default Settings and
Technical Specifications
Default Setting
www.routerlogin.net (which is the same as 192.168.1.1)
If the access point functions in access point mode and does not get an IP address
from a DHCP server in your network, the IP address is 192.168.1.1.
admin (case-sensitive, nonconfigurable)
password
However, for normal use, you do not need to enter this default password anywhere.
When you log in for the first time, you must specify a unique local device password.
Enabled by default.
Disabled by default.
Enabled as a WAN client in router mode. (LAN client in access point mode.)
Enabled in router mode. (Disabled in access point mode.)
Enabled for Wireless 1 network
Disabled for Wireless 2 and Wireless 3 networks
In the following factory default SSIDs, XXXXXX represents the last six digits of the
MAC address of the access point:
Wireless 1 default network: NETGEARXXXXXX
Wireless 2 optional network: NETGEARXXXXXX-2
Wireless 3 optional network: NETGEARXXXXXX-3
WPA2 Personal [AES]
The default WiFi passphrase is a unique passphrase that is printed on the access
point label.
WPA2 Personal [AES]
The default WiFi passphrase is sharedsecret.
240 User Manual