Restrict Internet Traffic By Connection Time [Router Mode] - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
11. In the Traffic Control section, enter a value in MB to specify when the access point
issues a warning message before the monthly limit in MB is reached.
This setting is optional. The access point issues a warning when the balance falls
below the number of MB that you enter. By default, the value is 0 and no warning
message is issued.
12. Select one or more of the following actions to occur when the limit is reached:
• Turn the Internet LED to blinking green or amber. This setting is optional. When
the traffic limit is reached, the Internet LED alternates between green and amber.
• Disconnect and disable the Internet connection. This setting is optional. When
the traffic limit is reached, the Internet connection is disconnected and disabled.
13. Click the Apply button.
Your settings are saved.
The Internet Traffic Statistics section helps you to monitor the data traffic. For more
information, see View the Internet traffic volume and statistics [router mode] on page
162.

Restrict Internet traffic by connection time [router mode]

If the access point is in router mode, you can record and restrict the traffic by connection
time. This is useful when your ISP measures your connection time.
To record and restrict the Internet traffic by connection time:
1. Launch a web browser from a computer or mobile device that is connected to the
access point network.
2. Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
Maintain and Monitor 160 User Manual