NETGEAR WAX204 User Manual page 57

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
7. To manually configure the PPPoE settings for IPv6, specify the following settings:
• Login. Enter the login name that your ISP gave you.
• Password. Enter the password for the ISP connection.
• Service Name (if Required). Enter a service name. If your ISP did not provide a
service name, leave this field blank.
Note: The default setting of the Connection Mode menu is Always On to provide
a steady IPv6 connection. The access point never terminates the connection. If the
connection is terminated, for example, when the modem is turned off, the access
point attempts to reestablish the connection immediately after the PPPoE connection
becomes available again.
8. Select an IPv6 Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns these addresses.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
9. In the LAN Setup section, select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCv6 client function.
• Auto Config. This is the default setting.
This setting specifies how the access point assigns IPv6 addresses to the devices on
your home network (the LAN).
10. (Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the access point's LAN
interface.
If you do not specify an ID here, the access point generates one automatically from
its MAC address.
11. Select an IPv6 Filtering radio button:
• Secured. In secured mode, which is the default mode, the router inspects both
TCP and UDP packets.
• Open. In open mode, the router inspects UDP packets only.
12. Click the Apply button.
Your settings are saved.
Manually Set Up Internet
Settings
57 User Manual