Time And Network Time Protocol Server; Manually Set The Time Zone And Adjust The Daylight Saving Time - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

Time and Network Time Protocol server

By default, the access point receives its time settings from a NETGEAR Network Time
Protocol (NTP) server. You can change to another NTP server or set the time zone and
daylight saving time manually.
Manually set the time zone and adjust the daylight saving
time
The access point might detect the time zone automatically or you might need to adjust
the time zone and daylight saving time settings. When the access point synchronizes
its clock with a Network Time Protocol (NTP) server, the access point detects the correct
date and time. If the access point does not detect the correct date and time, you might
need to manually set the time zone and adjust the daylight saving time setting.
To manually set the time zone and adjust the daylight saving time setting:
1. Launch a web browser from a computer or mobile device that is connected to the
access point network.
2. Enter http//www.routerlogin.net in the address field.
If you are not connected to the access point network but to the same network as the
access point, enter the IP address that is assigned to the access point. If you do not
know the IP address, see Find the IP address of the access point when you cannot
use routerlogin.net on page 27.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5. From the Time Zone menu, select the time zone for the area in which the access
point operates.
6. If the access point is in an area that observes daylight saving time, select the
Automatically adjust for daylight saving times check box.
Maintain and Monitor 142 User Manual