NETGEAR WAX204 User Manual page 21

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
settings, enter your Mac user name and password and click the Update Setting
button.
- Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure
message, click the ADVANCED button. Then, click the Add Exception button.
In the pop-up window that displays, click the Confirm Security Exception
button.
- Microsoft Internet Explore. If Microsoft Internet Explorer displays a There is
a problem with this website's security certificate message, click the Continue
to this website (not recommended) link.
-
Microsoft Edge. If Microsoft Edge displays a There is a problem with this
website's security certificate message or a similar warning, select Details >
Go on to the webpage.
When the Setup Wizard is finished, the Register to unlock all features page displays.
11. Register the access point or select either restricted access or full access for a limited
time to the local browser UI:
• Register with a NETGEAR account. Click the Login In with Netgear account
button and follow the prompts. Either use your existing NETGEAR account or
create a new free NETGEAR account.
• Register with a registration key. If you have a registration key (see Get a
registration key on page 26), click the Enter Registration Key and enter the key.
• Access limited features. Click the Skip Registration and Access Limited
Features button to get access to a restricted menu of the local browser UI without
time limitations. (For more information, see Set up the access point and complete
the initial log-in process on page 17.) The password that you must enter is your
new local device password.
• Temporarily access all features. Click the Skip Registration and Temporarily
Access All Features button to get access to the full menu of the local browser
UI, but you get this access three times only. (For more information, see Set up
the access point and complete the initial log-in process on page 17.) The password
that you must enter is your new local device password.
12. Log in again to the local browser UI by entering your new local device password.
This is the password that you specified during the Setup Wizard process.
The BASIC Home page displays.
The Home page displays various panes that let you see the status of your access
point at a glance. You can now configure and monitor the access point.
Installation and Initial Log-in 21 User Manual