Traffic Meter [Router Mode] - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
(Continued)
Field
Local IP Address
Connection Time
5. To change the information that displays for a device or the QoS priority, do the
following:
a. Select the radio button for the device for which you want to change the
information or priority.
b. Click the Edit button.
The Edit Device page displays.
c. In the Device Model field, specify a model.
d. In the Device Name field, specify a name.
e. From the Device Type menu, select a type.
The device type displays as a device icon on the Attached Devices page.
f. If QoS is enabled (see Enable QoS and automatically set the Internet bandwidth
on page 100 or Enable QoS and manually set the Internet bandwidth on page
101), select one of the following Device Priority buttons: Highest, High, Medium,
or Low.
g. Click the Apply button.
Your settings are saved. The Attached Devices page displays again.
6. To refresh the information onscreen, click the Refresh button.
The information onscreen is updated.

Traffic meter [router mode]

If the access point is in router mode, you can enable traffic metering to monitor the
volume of Internet traffic that passes through the access point's Internet (WAN) port.
With the traffic meter utility, you can set limits for traffic volume, set a monthly limit, and
get a live update of traffic usage.
Note: The information in this section and subsections does not apply if the access point
is in access point mode.
Maintain and Monitor
Description
The IP address that is assigned to the device when it joined the access point network.
This address can change when a device is disconnected and rejoins the network.
The time that elapsed since the device connected to the access point.
157 User Manual