Netgear Vpn Client To Fwg114P V2; Configuration Profile - NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Netgear VPN Client to FWG114P v2

Follow these procedures to configure a VPN tunnel from a NETGEAR ProSafe VPN Client to an
FWG114P v2. This case study follows the Virtual Private Network Consortium (VPNC)
interoperability profile guidelines. The menu options for the FVS328, FVL328, FWAG114, and
FWG114P v2 are the same.

Configuration Profile

The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table 8-1. Summary
VPN Consortium Scenario:
Type of VPN
Security Scheme:
Date Tested:
Model/Firmware Tested:
Gateway
Client
IP Addressing:
Gateway
Client
8-32
Scenario 1
PC/Client-to-Gateway
IKE with Preshared Secret/Key (not Certificate-based)
December 2003
FWG114P firmware v 2.2
NETGEAR ProSafe VPN Client v10.1
Static IP address
Dynamic
201-10301-02, May 2005
Virtual Private Networking