Information And Tasks While Printing - SINTERIT LISA PRO User Manual

26. Check that there are no unnecessary elements in the Print
Chamber. If not, close the printer Lid.
27. The printer is ready to print. Press START PRINTING to start
the process.

9. Information and tasks while printing

1. The printing process is divided into 3 steps: heating,
printing and cooling down. The actual, active step is shown
on the screen (bold).
2. The screen displays all important information for the
user: the file name, the active step, the process done in
percentage, the remaining time.
3. If you want to see the view from the internal camera, press
CAMERA VIEW. The view will be displayed for 10 seconds.
After that, the display will return to the main screen.
4. During printing, if there are any visible problems observed by the internal camera or the upper Viewing window, the
user can precisely change the temperature by pressing the button on the left (shows the current temperature inside
the printer). The next window allows you to change the temperature.
sample.scode
Print surface temperature offset:
-
Screen for temperature change during printing (before and after change).
+
36.6°C
BACK
sample.scode
If you are ready to start printing,
make sure there are no items
left inside the printer and close the lid
BACK
PREPARATION STEP 9/9
Check the Print Chamber and close the Lid.
sample.scode
The printer is ready
BACK
PREPARATION STEP 9/9
Press START PRINTING to start the printing process.
sample.scode
• Warmp • Printing
48.06% (1h45m left)
36.6°C
The main screen during printing.
sample.scode
Print surface temperature offset:
36.6°C
-
(+1.5°C)
BACK
Lid: Open
START PRINTING
• Cooldown
CAMERA VIEW
FOR 10s
+
Sinterit LISA PRO User Manual | 31