Cleaning The Printer Using The Phs Device, Sinetrit Atex Vacuum Cleaner Or Cleaning System - SINTERIT LISA PRO User Manual

Removing printout
You can skip the step if you have already
removed the printout
UNLOCK OVERFLOW BIN
BACK
CLEANING STEP 3/9
Overflow Bin unlock screen.
The next steps are cleaning the printer.
This can be done in two ways:
• using the PHS device or Sinterit ATEX Vacuum Cleaner with
Powder separator (we recommend),
• manually.
Depending on the selected method, the cleaning process will
differ. Therefore, a screen with a choice of options will appear
on the printer screen.
B. CLEANING THE PRINTER USING THE PHS DEVICE, SINETRIT ATEX VACUUM
CLEANER OR CLEANING SYSTEM
Using a vacuum cleaner is an easy and quick way to remove all remaining powder in the printer. Thanks to this, the printer
is ready to reprint right away. For this process, you can use either the Sinterit Cleaning System (ATEX Vacuum Cleaner
with Powder Separator) or the Sinterit Powder Handling Station (PHS).
Sinterit Powder Handling
DONE
Station (PHS)
Take out the Overflow Bin and pour out its contents
on the Foldable Tray or PHS worktop.
Cleaning the printer
Do you want to use Vacuum Cleaner or
clean the printer using manual procedure?
SINTERIT ATEX VACUUM CLEANER
BACK
Screen to choose the method of cleaning
the printer: manual or with ATEX vacuum cleaner.
Sinterit Cleaning
System
OR
MANUAL
Sinterit LISA PRO User Manual | 37