Refreshing The Powder Using The Powder Sieve Or Metal Sieve - SINTERIT LISA PRO User Manual

PRE-
PRINT
READY
POWDER
1. CONNECT METAL CONTAINER
WITH POWDER TO THE FUNNEL
Process of mixing of both powders (Pre-Print Ready) - powder homogenization.
B. REFRESHING THE POWDER USING THE POWDER SIEVE OR METAL SIEVE
STEP ONE - ADDING FRESH POWDER TO THE USED POWDER FROM PRINTER
1. Prepare a portion of Fresh Powder according to the information provided on the printer screen or in the Sinterit
Studio report.
2. Sift all the powder from the printer, used during the last printing. Use Sinterit Powder Sieve or Metal Sieve.
3. Add Fresh Powder to the sifted Used Powder in the Metal container. Close tightly using the lid and clamping ring.
4. Shake the container for minimum 15 seconds so that both powders are pre-mixed. We will have a Pre-Print Ready
Powder, which should be mixed in Sinterit Powder Sieve.
5. Before opening the container, wait a while for the powder to fall.
POWDER SIEVE/
METAL SIEVE
FRESH POWDER
1. Connect powders.
3. Shake the container vigorously.
Connecting the powders.
2. POUR THE POWDER INTO CHAMBER
TO MIX IT BY THE PHS SYSTEM
2. Close with lid
and clamping ring.
PRE-
PRINT
READY
POWDER
POWDER SIEVE/
METAL SIEVE
PRINT
READY
POWDER
Sinterit LISA PRO User Manual | 49