SINTERIT LISA PRO User Manual page 20

8. UNLOCK THE OVERFLOW
BIN AND REMOVE THE
PROTECTION FOIL FROM IT
Attention, Electrolock! To unlock the
Overflow Bin press UNLOCK LID/
7
OVERFLOW BIN button on the screen
. The magnetic blockade deactivates
2
for 10 seconds. After 10 seconds, it
will re-activate.
Grab the Overflow Bin handle, pull and
open it. Remove the protective foil
from the lid. Put the Overflow Bin back
in.
9. OPEN THE PRINTER'S LID
AND REMOVE THE SECURITY
FEATURES FROM THE INSIDE
Attention, Electrolock! To open the
printer's lid press UNLOCK LID/
5
OVERFLOW BIN button on the screen
. The magnetic blockade deactivates
2
for 10 seconds. After 10 seconds, it
will re-activate.
Softly press the lid and then lift it
using Lid's handle .
6
Be careful! The lid is quite heavy!
Remove the protection from the
printer's inside.
CAUTION!
Beware of sharp edges. Put on Protection Gloves to protect yourself from
injuring hands against the edge of the Heating module. The Protection Gloves
are included in the plastic bag ("Personal Protection" kit) with the Advanced
Accessories.
START CLEAN
NEW PRINT PRINTER
CONTROL UNLOCKED/
PANEL OVERFLOW
CLICK AND OPEN
Unlocking the Overflow Bin.
START CLEAN
NEW PRINT PRINTER
CONTROL UNLOCKED/
PANEL OVERFLOW
CLICK AND OPEN LID
Unlocking the printer Lid.
ELECTROLOCK
ELECTROLOCK
PRESS & LITF UP
PERSONAL PROTECTION
Sinterit LISA PRO User Manual | 20