SINTERIT LISA PRO User Manual page 52

Print Mechanics
Load Model
Start
Waiting to start
The PRINT panel.
After uploading the file, you will be able to automatically position the Feed Bed. You can skip this option if you want to
adjust it's level yourself.
• UNLOCK LID / OVERFLOW - this button releases the electrolock of the printer Lid and/or Overflow Bin for 10 seconds.
Only after pressing this button is it possible to open the printer lid or remove the Overflow Bin,
• START - this button will start the printing process. It will be available to choose when the file is loaded.
4. Mechanics - this tab allows you to change the height of feed bed, print bed and position of recoater.
• RECOATER - press to move the recoater all the way
to the left or press to move the recoater all the way
to the right,
IMPORTANT!
Before you can move the Recoater freely, you have to press which will allow homing of the recoater.
• FEED - press to raise the Feed Bed by one step or press to lower the Feed Bed by one step,
• PRINT - press to raise the Print Bed by one step or press to lower the Print Bed by one step,
• START LEVELING - press this button to start the process of leveling the powder surface with the recoater.
Temp. Advanced
Unlock Lid/Overflow Uploaded Models
Recent Models
Load from USB
The LOAD MODEL panel.
Print Mechanics Temp.
Recoater
Feed
Feed
Start Leveling
The MECHANICS panel.
Sinterit LISA PRO User Manual | 52
Advanced
Print
Print