Heathkit SB-401 Assembly Manual page 85

( ) Connect a 1" red stranded wire from lug 1
of fuseholder X (8-1) to lug 2 of the switch
on the rear of the Function switch (8-1).
( ) Connect the red wire coming from hole 4 to
FS2-Rl1 (8-2).
( ) Connect the black wire coming from the
2-wire shielded cable from B0II3 of the
cable assembly, to lug 1 of the switch on
the rear of the Function switch (8-1).
..
( ) White-yellow
( ) Gray
( ) Black
( ) Connect a 3-1/2" orange wire from lug 14
of terminal board #1 (8-1) to FS2-FI2 (8-1).
( ) Connect
a
1" bare wire from the Function
switch control solder lug (8-1) to FSI-R6
(8-1). .
FSI-R2 (S-2).
FSI-R12 (S-I).
FSI-R11 (S-I).
FSI-R9 (S-1).
FSI-R7 (8-1).
FS2-Fl
(8-1).
F82-R8 (N8).
FS2-R7 (8-1).
( ) Red
( ) White - violet
CONNECT TO WIRE COLOR
( ) White
( ) White-green
( ) Green
( ) Connect the red wire coming from lug 5 of
tube socket V7 to FS2-R8 (S-2).
Connect the wires from B0II3 of the cable assem-
bly to the Function switch as follows:
Page 71