Heathkit SB-401 Assembly Manual page 6

:B:E.A.THKI:T@
Page 4
PICTORIAL PARTS
NOTE: To avoid intermixing parts, do not open
any of the parts packs until directed to do so
at the beginning of one of the Parts Lists.
Any
part that is packed in an individual envelope
with a part number on it should be placed back
in its envelope, after it is identified, until that
part is called for in a step.
Pack #5 consists mainly of items too large
to
fit into the small packages, and those items
used in a number of the assembly sections, such
as the large metal parts.
You will be directed to open each of these pack-
ages as they are needed. Each ofthe five assem-
bly sections of the Manual contains its ownParts
List and Step-By-Step instructions. At the be-
.ginning of each Parts List you will be told which
numbered package to open. You will also be
di-
rected to remove the parts from pack #5 that
are required to complete that assembly section.
The Transmitter packaging consists ofthe large
shipping carton, which contains smaller pack-
ages, and a number of loose parts. Some of the
smaller packages have numbers 1 through
4
on
them. After these four numbered packages have
been removed from the large carton, the re-
maining parts will be considered to be pack
#5.
INSTRUCTI UNPACKING