10.2.3 Connecting the stud welding gun
Only use the welding guns approved by the manufacturer. See chapter "6.5 Permitted
stud welding guns" on page 21.
Plug the welding cable into the socket (a) and turn
the plug to the right until stop.
Plug the control cable into the control cable socket
(b) and tighten the union nut.
The gun type is automatically recognised by the stud welding device. Check
whether the connection of the gun requires any special adapters (see chapter
"6.5 Permitted stud welding guns" on page 21).
38
Operating instructions Soyer Bolzenschweißtechnik
a
b