Personal Protection Equipment - Soyer BMS-9 Operating Instructions Manual

2.3

Personal protection equipment

It is recommended to wear personal protective equipment when working with the stud
welding device.
Danger from missing or incorrect personal protective equipment
Stud welding may lead to danger of burns, especially due to hot welding spatters.
Danger of blinding may also arise due to the occurrence of strong arcs.



Recommended personal protective equipment
12
Always wear suitable, closed protective clothing.
Type and extent of the required protective equipment depend on the
respective occurrence of welding spatters and/or arcs. Both occurrences
vary, depending on the basic material, stud material, stud size and the
required welding performance.
Please observe the following instructions for protective equipment.
Safety goggles
Welding spatters and a flash occur during the welding
process. In order to protect your eyes, wear appropriate
safety goggles with side protection and a filter protector,
if necessary.
Protective gloves
During the welding process, the workpieces and
components of the welding gun get hot and welding
spatters occur. Wear appropriate, incombustible, heat-
resistant protective gloves.
Protective clothing
Welding spatters occur during the welding process.
Wear appropriate, incombustible and, if necessary,
heat-resistant protective clothing.
Safety footwear
Welding spatters occur during the welding process.
Wear appropriate, incombustible, heat-resistant safety
footwear.
Hearing protection
Relatively loud welding noises may occur, depending
on the welding device and the welding application. In
that case, wear appropriate hearing protection.
Operating instructions Soyer Bolzenschweißtechnik