General Safety Instructions - Soyer BMS-9 Operating Instructions Manual

Safety instructions on the device
As an additional warning of danger, warning labels can be found on the devices.
Warning labels are affixed by the manufacturer and must not be removed. If a warning
label is damaged and thus illegible, a new warning label must be affixed immediately.
Warning labels must be obtained from the manufacturer.
2.2

General safety instructions

Danger from electric current, general information
When working on live components, there is a danger to life from electric current.




Work on electric or electronic components may only be performed by trained
electrotechnical personnel in accordance with currently applicable
electrotechnical regulations.
Protection devices must not be manipulated or disabled. Protection devices
include, for example, housing and housing cover, fuses or power switches.
If protection devices have to be removed for maintenance work, the device
may only be switched on again when all protection devices are installed and
their functionality has been checked.
Starting the device with faulty protection devices is not permitted. Faulty
protective devices must be repaired or replaced immediately. Unintentional
operation by third parties must be prevented.
Operating instructions Soyer Bolzenschweißtechnik 9