Intended Use Of The Stud Welding Device; Incorrect Use; Intended Use Of The Stud Welding Guns - Soyer BMS-9 Operating Instructions Manual

2.4

Intended use of the stud welding device

With the SOYER® BMS-9 capacitor discharge stud welding device, pins and threaded
studs from M3 to M8 (M3 to M10 with BMS-9V) as well as many different weld
fasteners made of steel, stainless steel, aluminium and brass can be welded in
accordance with DIN EN ISO 13918 (capacitor discharge).
Special studs or diameters upon request.
The stud welding device can only be operated with the welding guns described in
chapter "6.5 Permitted stud welding guns" on page 21.
The stud welding device must be operated within the scope of technical data.
2.4.1

Incorrect use

Any use of the device deviating from the intended use is considered as not intended.
Not intended use, unauthorised modification or manipulation of the device will void the
declaration of conformity and warranty claims against the manufacturer.
2.5

Intended use of the stud welding guns

With the SOYER® stud welding guns, pins and threaded studs from M3 to M8 (up to
M10 with special gun and adapter) as well as many different weld fasteners made of
steel, stainless steel, aluminium and brass can be welded in accordance with DIN EN
ISO 13918 (capacitor discharge).
Special studs or diameters upon request.
The stud welding guns can only be operated with the stud welding devices described
in chapter "7.3 Technical data for PS-9(K) stud welding guns" on page 25 and chapter
"8.1 Technical data for PS-1K stud welding gun" on page 28.
The stud welding gun can only be operated within the scope of technical data.
2.5.1 Incorrect use
Every use of the welding gun deviating from the intended use is considered as not
intended.
Not intended use, unauthorised modification or manipulation of the device will void the
declaration of conformity and warranty claims against the manufacturer.
Misusing the gun as a tool, e.g. as a striking tool for checking the welding quality, is not
permitted.
Operating instructions Soyer Bolzenschweißtechnik 13