Displaying The Operating States - Soyer BMS-9 Operating Instructions Manual

6.3.1

Displaying the operating states

Figure 2: Operating states
Item
a
b
c
d
Ready
In normal operation, the LED lights up when the stud welding device is ready
for operation in normal mode.
Stud on workpiece
LED lights up when the earth terminal is connected and the stud touches
the workpiece.
Release
LED lights up when the release button on the welding gun is pressed.
Malfunction
The LED lights up when a malfunction of the stud welding device occurs.
See chapter "12.5 Malfunctions with an error message" on page 50.
Operating instructions Soyer Bolzenschweißtechnik
Designation
19