Cleaning Of The Stud Welding Gun - Soyer BMS-9 Operating Instructions Manual

7.4

Cleaning of the stud welding gun

On a regular basis, remove slag and welding spatters from the gun and the support tube
using a suitable tool.
The frequency of cleaning depends on the operating conditions of the stud welding gun.
Risk of injury during cleaning
Welding spatters and slag can be sharp-edged.

We recommend the use of SOYER® separating spray in order to prevent
impurities from welding spatters and slag and to simplify the cleaning
process.
26
Wear protective gloves when cleaning.
Operating instructions Soyer Bolzenschweißtechnik