Specifications - Banner Q5X Series Instruction Manual

4 Specifications

Sensing Beam
Visible red, Class 2 laser, 650 nm
Supply Voltage (Vcc)
10 to 30 V DC (Class 2 supply) (10% max ripple within limits)
Power and Current Consumption, exclusive of load
< 1 W
Sensing Range
95 mm to 2000 mm (3.74 in to 78.74 in)
Output Configuration
Channel 1: Push/pull output, configurable PNP or NPN output
Channel 2: Multi-function remote input/output, configurable PNP or
NPN, or pulse frequency modulated output
Output Rating
Current rating: 50 mA maximum
Black wire specifications per configuration
Output High:
Push/Pull
Output Low:
Output High:
PNP
Output Low:
Output High:
NPN
Output Low:
White wire specifications per configuration
Output High:
PNP
Output Low:
Output High:
NPN
Output Low:
≥ Vsupply - 2.5 V
≤ 2.5 V
≥ Vsupply - 2.5 V
≤ 1V (loads ≤ 1 MegΩ)
≥ Vsupply - 2.5 V (loads ≤ 50 kΩ)
≤ 2.5 V
≥ Vsupply - 2.5 V
≤ 2.5 V (loads ≤ 70 kΩ)
≥ Vsupply - 2.5 V (loads ≤ 70 kΩ)
≤ 2.5 V
www.bannerengineering.com - Tel: + 1 888 373 6767
Q5X Laser Triangulation Sensor with Dual Mode for Jam Detection
Boresighting
± 43 mm at 2000 mm
Response Speed
User selectable: 15, 25, or 50 ms
Delay at Power Up
< 2.5 s
Maximum Torque
Side mounting: 1 N·m (9 in·lbs)
Ambient Light Immunity
Up to 5000 lux at 1000 mm
Up to 2000 lux at 2000 mm
Connector
Integral 4-pin M12/Euro-style male quick disconnect
Construction
Housing: ABS
Lens cover: PMMA acrylic
Lightpipe and display window: polycarbonate
Temperature Effect (Typical)
< 0.5 mm/°C at < 500 mm
< 1.0 mm/°C at < 1000 mm
< 2.0 mm/°C at < 2000 mm
Discrete Output Distance Repeatability
Distance (mm)
95 to 300
300 to 1000
1000 to 2000
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Repeatability
± 0.5 mm
± 0.25%
± 0.5%
33