Q5X Laser Triangulation Sensor with Dual Mode for Jam Detection
Condition
One valid TEACH point that, after offset,
becomes invalid
3.6.5 Dual (Intensity + Distance)
Dual (intensity + distance) TEACH records the distance and amount of light received from the reference surface. The output
switches when an object passing between the sensor and the reference surface changes the perceived distance or amount
of returned light. For more information, see
Note: To use the following instructions, set the sensor to
indicators are amber.
Note: To program the sensor using remote input, remote input must be enabled (
2
Press and
Hold > 2s
1. Present the target.
Method
Action
Push Button
Present the reference target.
Remote Input
2. Start the TEACH mode.
Method
Action
Push Button
Press and hold the TEACH button for more than 2 seconds.
Remote Input
No action required.
3. Teach the sensor.
Method
Action
Push Button
Press the TEACH button.
Remote Input
Single-pulse the remote input.
28
TEACH Result
Sets a switch point at 120 cm.
Additional Information
3
Press
again
1
www.bannerengineering.com - Tel: + 1 888 373 6767
Display
alternately on the display.
on p. 37.
=
. The RET, FLO, and BGS
Reference
Surface
Result
The target's match percentage displays
Result
Light Operate:
flash on the display. The RET, FLO, and
BGS indicators flash.
Dark Operate:
flash on the display. The RET, FLO, and
BGS indicators flash.
N/A
Result
The switching threshold flashes rapidly
T
and the sensor returns to Run mode.
and the switch point distance flash
=
).
Increased
Height
and/or
Intensity
Decreased
Height
and/or
Intensity
and
and