Connecting Across A Network; Installation And Configuration - Adaptec SCSI RAID 2010S Software User's Manual

Connecting Across a Network

Storage Manager can run as a client/server application across a
network using a TCP/IP connection. The Storage Manager client
runs on a supported workstation operating system and connects to
one of the supported networked servers running the Adaptec
communication engine.
workstation and server connections for a TCP/IP network.
Windows
NT
TCP/IP
Windows
2000
Figure 3-19 Client/Server Network

Installation and Configuration

Remote communication uses both client- and server-based
software components. Client remote communication software is
installed automatically when you install Storage Manager. Server
remote communication software is installed if you elect to do so
during the Storage Manager installation procedure.
Figure 3-19
Client/Workstation
Windows
Windows
2000
Windows
NT
Servers
shows the supported
XP
Windows XP
Red Hat
Storage Manager
Red Hat
7.3
Red Hat
7.3
7.3
3-51