Event Messaging By Pager - Windows 2000 And Windows Nt Only - Adaptec RAID 2100S Software User's Manual

Event Messaging by Pager – Windows 2000 and Windows NT only
Storage Manager can send event messages by e-mail to
alphanumeric paging devices.
Note: This feature should work with any alphanumeric
paging system that supports email. Contact your service
provider for specific information.
To configure alphanumeric pager support, follow these steps:
1
Ensure your pager is working and activated by a service
provider.
2
Establish a permanent connection to an Internet Service
Provider (ISP) or create a dial-up networking connection to
your ISP.
3
Configure your email client software to access your Internet
mail server.
4
Determine the email addresses for the people you want to
receive event messages.
5
In Storage Manager
a
Set the Display Threshold to the level where you want to
start broadcast messages.
b
Enable Email to Users in the Event Broadcasting window
(Options > Event Broadcast Control).
c
Enter the email addresses for the pagers in the Email Users
list box.
d
Click OK to exit the window and save changes.
When the broadcaster is active, the event logger sends text messages
for selected events to the pager using the email address specified.
Storage Manager
3-43