Overview of the Installation Process
The following steps provide an overview of the process of
installing and configuring the ASA-7211 adapter:
1 Verify that your computer meets the requirements described in
System Requirements on page
2 Gain familiarity with the contents of the Adaptec iSCSI
installation CD.
3 Install the Adaptec iSCSI adapter as described in
4 Install the appropriate driver for your operating system as
described in
5 Connect a Ethernet cable with the appropriate connector type
(either copper or fibre) and establish network connectivity
between your adapter and your targets.
6 Install the iConfig utility and use it to configure your network,
as described in
Chapter
3.
Chapter 4, Configuring Your iSCSI
1-4.
Introduction
Chapter
2.
System.
1-7