Servo Ready (/S-Rdy) Output - YASKAWA E-II Series User Manual

8.11.4 Servo Ready (/S-RDY) Output

Signal
Type
Name
Output /S-RDY
This signal indicates that the SERVOPACK received the servo ON signal and completed all preparations.
It is output when there are no servo alarms and the main circuit power supply is turned ON.
An added condition with absolute encoder specifications is that when the SEN signal is at high level, absolute data was out-
put to the host controller.
The servo ready signal condition can also be checked on the digital operator. For details, refer to 7.1.4 Status Display and
7.4.1 List of Monitor Modes.
The /S-RDY signal can be allocated to another output terminal with parameter Pn50E. For details, refer to 7.3.3 Output Cir-
cuit Signal Allocation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connector Pin
Setting
Number
ON (low level)
CN1-29, 30
(Factory setting) OFF (high level)
Meaning
Servo is ready.
Servo is not ready.
8.11 Other Output Signals
8-79
8