•
Press and release the SET button to
select the pressure display.
•
Press
and
button to scroll between BAR or PSI.
•
Press and release the SET button to
select either BAR or PSI.
•
When the tire pressure monitoring
system has been selected, —— PSI or
bAR will be shown in the display
screen
until
traveling at a speed greater than
12 mph (20 km) and the tire pressure
signal is received.
To exit the tire pressure display:
•
Press
and
button until REtURn is shown.
•
Press and release the SET button to
return to the TRIP screen
Return
Select REtURn to return to the main
display.
release
the
SCROLL
the
motorcycle
release
the
SCROLL
General Information
Trip Meter
Do not attempt to switch between trip
meter display modes or reset the trip
meter with the motorcycle in motion
as this may lead to loss of motorcycle
control and an accident.
is
1.
Trip meter display
To access the trip meter information
press and release the TRIP button on
the left handlebar switch housing until
the required display is shown.
1
cjxy
1.
TRIP button
Warning
1
85