Trip Meter - Triumph Street Triple S Owner's Handbook Manual

GENERAL INFORMATION
92

Trip Meter

Do not attempt to switch between trip
meter display modes or reset the trip
meter with the motorcycle in motion
as this may lead to loss of motorcycle
control and an accident.
1. Trip meter display
To access the trip meter information
press and release the TRIP button on
the left handlebar switch housing until
the required display is shown.
1
cjxy
1. TRIP button
Warning
1
The display will scroll through in the
following order:
▼ Journey time
▼ Average fuel consumption
▼ Instantaneous fuel consumption
▼ Average speed
▼ Odometer
▼ Front Tyre Pressure Display (if TPMS
is fitted)
▼ Rear Tyre Pressure Display (if TPMS
is fitted)
▼ Journey distance
▼ Range to empty.
Each display provides the following
information all calculated since the trip
meter was last reset to zero:
Journey Time
The total time elapsed.
Average Fuel Consumption
An indication of the average fuel
consumption. After being reset the
display will show dashes until 0.1 miles/
km has been covered.
Instantaneous Fuel Consumption
An indication of the fuel consumption at
an instant in time.
Average Speed
The average speed is calculated from
when the trip computer was last reset.
After being reset the display will show
dashes until 1
covered.
Odometer
The odometer shows the total distance
that the motorcycle has travelled.
mile/km has been