Odometer/Trip Meter; Odometer; Trip Meter - Triumph Daytona 675 2014 Owner's Handbook Manual

General Information

Odometer/Trip Meter

1
3
2
4
cfin
1. Button A
2. Button B
3. Odometer/Trip meter display
4. Trip meter 1 display
5. Trip meter 2 display

Odometer

When the ignition is switched on, the
odometer will be displayed
three seconds then the last selected trip
meter will be shown.
The odometer shows the total distance
that the motorcycle has traveled.
To access the odometer, with the
motorcycle stationary and in neutral
press and release button A until SEt UP
is visible in the display screen then press
button B. Press and release button A
until odometer is visible.
To exit odometer, press and release
button A until rEturn is visible then
press button B. Trip 1 will be visible in the
display screen.
30

Trip Meter

Either trip meter shows the distance
that the motorcycle has traveled, trip
time, average
instantaneous fuel consumption and
average speed, all since the trip meter
on display was last reset to zero.
To access the trip meter information,
turn the ignition to the ON position.
Press and release button A until the
desired trip meter is visible in the display
screen.
Press and release button B until the
desired display is visible. The display will
scroll through in the following order:
• Trip distance
• Range to empty
5
• Trip time
• Average fuel consumption
• Instantaneous fuel consumption
• Average speed.
Each display provides the following
information all calculated since the trip
meter was last reset to zero:
Trip Distance
for
The total distance traveled.
Range to Empty
This is an indication of the probable
distance that can be traveled on the
remaining fuel in the tank.
Trip Time
The total time elapsed.
Average Fuel Consumption
An indication of the average fuel
consumption. After being reset the
display
0.1 miles/km has been covered.
fuel consumption,
will show dashes until