Default Mode - RGBlink VENUS X1PRO Quick Start Manual

Hide thumbs Also See for VENUS X1PRO:

Table of Contents

Default Mode

In default mode, both output channels output the same signal and resolution.

PIP is available for use.

This is the default mode following a reset.

Single Image Switching

Default DP for the current input source, if need switch other signal, for example, DVI, push the DVI button.

DP button light will be off after pushing the DVI button, and DVI button light will be on if the DVI signal is

effective and stable. If the DVI signal is invalid or no input, DVI button light will flash.

same with above, switch the signals among HDMI and input option signal.

PIP Setting

Enable the PIP function

VENUS X1PRO supports seamless switching for single image and double images.

1. Push the [MENU] button, and enter to menu items, turn the rotary knob, select <OUTPUT>.

2. Push the knob to confirm, turn the rotary knob again, and select <PIP>.

3. Push the knob to confirm, and enter to the menu items as follows:

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

->INPUT

OUTPUT

PICTURE

SPLIT

INPUT

->OUTPUT

PICTURE

SPLIT

->PIP

Tel: 00865925771197

Email: sales@rgblink.com

Fax: 00865925788216

http://www.rgblink.cn

Table of Contents