Take】Button - RGBlink GX4 Quick Start Manual

【TAKE】Button
When GX4 power on, system default HDMI input signal.
To switch signal, press CVBS,VGA,DVI or SDI. For example, to switch to CVBS, push【CVBS】
the button flashes.
TAKE MODE allow users to switch inputs with transition effect
To EnableTAKE mode , Keep pressing
The LCD sreen shows the info below for 2S
And then go back to the main interface
If user want to switch to VGA signal, push VGA
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
button for 3s and the TAKE MODE is ON
support@rgblink.com
TAKE MODE ON
AUDIO INVALID
button
| www.rgblink.com
button and
21 / 32