Language; Factory Reset; Shortcut Buttons; Take】Button - RGBlink GX4pro User Manual

Table of Contents

HOT BACKUP: ON or OFF

HOT BACKUP_1,2,3,4,5,

Chose Hot Backup On and choose one input source for the each backup. Up to 5 backups can be set

7. DELAY RECALL

Value range from 0 to 255S

3.3.9 Language

To switch langue here. English or Chinese available.

Or Keep pressing MENU and SCALE button for 3 S to switch language.

Image Control One comes with shortcut buttons to enter the sub-menu of certain features. Here are details of

some quick buttons.

3.4.1【TAKE】Button

When Image Control One power on, system default HDMI input signal.

To switch signal, press CVBS,VGA,DVI or SDI. For example, to switch to CVBS, push 【VGA】 button and the button

flashes.

TAKE MODE allow users to switch inputs with transition effect

To Enable TAKE mode , Keep pressing

The LCD screen shows the info below for 2S

And then go back to the main interface .If user want to switch to DVI signal, push【DVI】

Then push TAKE button again. VGA signal will be switched to LED screen with set transition effect.

Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com

FACTORY RESET

YES <OK>, NO <MENU>

button for 3s and the TAKE MODE is ON.

TAKE MODE ON

AUDIO INVALID

button

Table of Contents