Table of Contents
Advertisement
How to Realize Signal Auto Take
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and choose [AUTO TAKE].
3. Push the [TAKE] button to confirm, and enter to the auto take setting. Push the [NEXT]
button to choose "ON" or "OFF", then push the [TAKE] button to confirm. System default the
status is "ON", and when switch the signal, user need not to push the [TAKE] button.
How to Lock the Front Panel
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and choose [LOCK].
3. Push the [TAKE] button to confirm. Push the [NEXT] button to choose "ON" or "OFF", then
push the [TAKE] button to confirm. Push the [MENU] button for 3 seconds to unlock panel.
How to Realize Hot Backup
1. Push the [MENU] button on the front panel, and enter to the menu items.
2. Push the [MENU] up arrow button or [NEXT] down arrow button, and choose [HOT BACKUP].
3. Push the [TAKE] button to confirm, and enter to hot backup function setting. Push the [NEXT]
button to choose "ON" or "OFF", then push the [TAKE] button to confirm.
Inputs 1 ~ 8 are any combination of backup, it will recall another backup if one signal has
problem. The detailed parameters can be set on windows control program, and invalid for
button operation.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
10
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925771202
http://www.rgblink.cn
Advertisement
Table of Contents
