Image Layout; Split - RGBlink Q16pro Gen2 1U Quick Start Manual

Image Layout

Select the image layout for presentation mode. There are 15 layout patterns built-in as follows：
Push the knob to select layout, and the LCD Panel will automatically return to the previous menu
interface.
Users can use the L1-L8 buttons on the front panel to select the layer, and then select the input signal by
using IN1- IN8 buttons.
Note: ONLY the first four layouts are available for
is chosen.

Split

After the device is boot up, push MENU to enter main menu interface. Then rotate the knob and select
<Split>.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
4K input module. Please reselect if the wrong layout
Output Resolution
Split Layout
support@rgblink.com
>>
>>
|
www.rgblink.com
9 / 14