Input Setting - RGBlink Q Series Quick Start Manual

Input Setting

Click any input port, the board where the port locates
is selected. Users can do settings to the port now.
A red rectangle flashes around the chosen port when
it is clicked.
User can set <Property> and <EDID>.
Property Setting
Input Port：chosen port
Scale:
X/Y：the starting horizontal and vertical position
Width/Height : the horizontal and vertical size of scale.
Crop:
Support cropping for position, height and width.
EDID
Input Port：chosen port
Basic Parameters:
EDID Template：RGB-DVI or RGB-HDMI
Monitor Name：type the monitor name
Width/Height/Frequency：type in custom parameters
Q16pro's modules which support EDID are as follows:
● Quad HDMI 1.3 Input Module
● HDMI 2.0 & DP 1.2 4K@60 Input Module (to be
published)
● Quad DVI Input Module (to be published)
Order Codes of modules please refer to 4.2
Communication Board with PVW
When there is communication Board with PVW input
module installed on Q16pro, you can click HDMI port for
following operations.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
11