Turn On Labeling Operation - Weber Geset 121 User Manual

Chapter 8 Operation

Turn on labeling operation

The automatic operation is used to label products:
Requirements




Instruction
Please turn on the labeling system for operation as follows.
Step
1
2
3
4
5
Version: 02.08.12
Labeling system is turned off.
Material rolls at labeling system loaded and threaded.
Labeling system is connected to power and compressed air.
System was put into operation (see chapter „Adjustment and initial
operation of labeling system").
Procedure
Turn on the main switch.
Hazard from actively controlled movements!
The conveying system starts to move by pushing the [Start] – button.
̶
Maintain a distance from moving parts.
Push the [START] –button at the labeler.
Push the [SYSTEM ON] –button at the operator's panel.
Add the products to the labeling system.
Remove the products at outlet.
Page 52 of 71
32708732 Geset 121