Chapter 7 Adjustment and initial operation of labeling system
Adjust side guidance
No.
Description
1
STAR GRIP SIDE GUIDANCE OPERATOR'S SIDE
2
SIDE GUIDANCE DISTANCE
3
STAR GRIP SIDE GUIDANCE DRIVE SIDE
The side guidances are adjusted by star grips.
The side guidances at the wrap belt's side are fixed ex-factory and cannot be adjusted
later on in production operation.
The guidances have to be adjusted that between product and side guiding is a crack of
appr. 1-1,5 mm per side.
Requirements
System is turned off.
Product feed is interrupted.
One sample product.
Please adjust the side guidances as follows.
Step
1
2
3
4
5
6
Version: 02.08.12
Fig. 7-1: Side guidances
Procedure
Loosen the star grips.
Open the side guidances.
Place one sample product between the side guidances.
Adjust the side guidances in a distance of 1-1,5mm to the product. (In inlet
passage this distance can be adjusted larger.)
Tighten the star grips.
Check the adjustment by moving a sample product through the side guidances.
The sample product has to slide easily through the guidance at each passage.
Page 40 of 71
32708732 Geset 121