Pitch Peeler Blade (Gimbal Adjustment) - Weber Geset 121 User Manual

Chapter 7 Adjustment and initial operation of labeling system

Pitch peeler blade (Gimbal adjustment)

Pos.
1
2
3
4
The height position of the label on the product is adjusted by alignment with the
handwheel.
With the adjustment bolts to lateral inclination, the longitudinal- and lateral inclination of
the labeler and thus the peeler blade to product are adjusted. The peeler blade has to be
aligned parallel to product. To adjust the longitudinal- and lateral inclination, the clamping
screws can be easily loosened and after adjustment they can again be tightened steadily
again after adjustment. This adjustment was arranged during start-up by Bluhm Weber
and is not necessary during production operation.
Version: 02.08.12
Description
HANDWHEEL FOR HEIGHT ADJUSTMENT OF LABELER
CLAMPING SCREWS
LOCKING SCREWS FOR LATERAL INCLINATION
LOCKING BOLT FOR LATERAL INCLINATION
Page 42 of 71
Fig. 7-3: Gimbal adjustment
32708732 Geset 121